← Back

Enduro Medium Grade Application

Sizes: 300grm aerosol, 1 liter, 4 liter, 20 liter, and 200 liter

Contents: Natural lanolin blended with a carrier, which evaporates leaving a protective coating.

Coverage: Approx. 8-10m2 per litre depending on the surface

Enduro Medium Grade

Applications: General Workshop Lubricant

Rust Protection on stored equipment,
tools, machinery
• Quadbike vehicle chassis – on beach and farm
• Frees up frozen components, padlocks, hinges, fasteners, door handles & tools.
• Electrical wiring and connections – nonconductive to 70kV-switchgear, air conditioner components, circuit boards.
• Internal motor component preservation – boat motors.
• Lubricant for drilling, cutting, machining and pressing

Application

• Shake container well to mix product.
• Apply using a trigger sprayer, garden sprayer or airless spray gun.
• The longer the time from application to use the better the surface will stay.
• On areas that need to be clean to touch – spray and wipe off excess with a rag as this will leave a thin waxy film.
• Dispose of rags away from ignitable materials.

• Resists wash off.
• Food Grade. NSF: H1, H2, R2
• MPI: C12 Lubricant
• Environmentally Friendly
• Biodegradable
• Non-Carcinogenic
• Non-Leaching -Non-evaporative
• Safe on rubbers and wiring.
• Non-conductive to 70kv
• Resists acids & alkalis, moisture and salt

State: Liquid-light brown colour
• Insoluble in water
• Relative vapour density (air=1): 5.3
• Lower explosive limit (%): 1.0
• Upper Explosive limit (%); 6.0
• Auto-ignition Temp (°C): >200 deg C
• Boiling Range (°C): 187-216deg C
• Specific Gravity (H20=1): 0.81-0.83@24 °C
• Vapour Pressure (kPa): 0.05kPa
• Evaporation Rate: 0.03 (BuAc=1)
• Flash Point (°C): 66
• Viscosity: 5.1@40degC mm2/s
• Nonconductive point: 70Kv