INDUSTRIAL LUBRICANTS
At Prolan, we have the lubrication and corrosion protection solution for your application.
Industrial
Prolan is the perfect lubricant solution for industrial applications, in corrosive and harsh environments. We have products in our range that will protect your equipment and machines by lubricating components and preventing corrosion. This will help to maintain your valuable assets, including those that operate in tough conditions such as crane barges on harbours, digger barges, loaders in fertilizer companies, wind turbines, equipment in pulp plants, equipment in salt and fertilizer plants and many more applications.
We have solutions that work in extreme environments where other products fail .Our solutions are suitable for use on stainless steel to prevent galling or stop components from seizing and they are effective for the assembly or disassembly of components.
With our engineering industry experience and technical knowledge, we can help you get a solution that meets your needs.
Related Uses
Longterm corrosion protection
Provides the longest term protection of all Prolan liquid products.
Environmentally friendly and Biodegradable.
Resists acids & alkalis, moisture & salt.
Won’t break down rubbers & wirings.
International Food Grade Approval : NSF H1
MPI Approved C15 ( all animal products except dairy)
Long lasting protection savings time on multiple re-application.
Improves COF checkout.
Increases machinery life and resale value.
Easy to apply. Resists wash off.
Minimal preparation required before coating.
Easy and safe to apply using an airless sprayer, paintbrush or air undersealing gun. Where possible remove any dirt or scale or other surface coating before applying Extreme and leave overnight or longer.
1 Litre of Prolan covers approx 8-10 sq metres.
Applications can be recoated directly over top of the existing coating. The coating should be inspected after 12 months to make sure that any areas that have been missed can then be touched up.
In cooler temperatures the product will thicken and may need to be warmed by placing in a bucket of hot water.
N.B Cold water blasting will not remove Prolan Coating.
Prolan cleaner available to remove existing coatings.
Long lasting protection saving time on multiple reapplications.
Saves downtime on maintenance.
Environmentally friendly and biodegradable.
Prevents oxygen and moisture from contacting metal surfaces.
Resists acids & alkalis.
Non conductive to 70kV
Won’t break down rubbers & wiring.
International Food Grade NSF H1
NZ Food Grade MPI C12
Excellent General workshop lubricant
Easy to apply. Versatile – multiple uses.
No Preparation required of the surface to be coated.
Prolan is easy and safe to apply using an aerosol, trigger pack sprayer, garden sprayer or airgun.
For dairy farm quad bikes the whole machine is coated underneath then left to tack off over 24hrs before use.
On areas that need to be clean to touch – spray and buff in excess with a rag as this will leave a thin waxy film.
Where possible remove any dirt or scale before coating. Spray onto fibreglass or plastic surfaces and rub with a rag to rejuvenate.
1 Litre of Prolan covers approx 8-10 sq metres
Applications can be recoated in 6-12 months intervals depending on the situation.
N.B: Cold water blasting will not remove Prolan coatings. Prolan cleaner is available to take off existing coatings.
Environmentally friendly and Biodegradable.
Non-Carcinogenic
Non- Leaching
Non- Evaporative.
Won’t break down rubbers & wiring.
Non conductive to 70kV
Resists acids & alkalis, moisture & salt.
Hermatically seals off surfaces.
International Food Grade.Approval NSF H1
MPI C12 Approval
Versatile and Clean to use.
Long lasting protection saving time on multiple reapplications.
Stays on long-term - Cold water blasting will not remove.
Increases machinery life and resale value.
Easy to apply. Resists wash off.
Easy and safe to apply using a trigger pack sprayer, garden sprayer or airgun.
Where possible remove any dirt or scale or other surface coating before applying Enduro and leave overnight or longer.
1 litre of Prolan covers approx 8-10 sq metres
Applications can be recoated in 12-24 months intervals depending on the situation.
NB: Cold water blasting will not remove Prolan coating.
Prolan cleaner available to remove existing coatings.
Longterm corrosion protection
Provides the longest term protection of all Prolan liquid products.
Environmentally friendly and Biodegradable.
Resists acids & alkalis, moisture & salt.
Won’t break down rubbers & wirings.
International Food Grade Approval : NSF H1
MPI Approved C15 ( all animal products except dairy)
Long lasting protection savings time on multiple re-application.
Improves COF checkout.
Increases machinery life and resale value.
Easy to apply. Resists wash off.
Minimal preparation required before coating.
Easy and safe to apply using an airless sprayer, paintbrush or air undersealing gun. Where possible remove any dirt or scale or other surface coating before applying Extreme and leave overnight or longer.
1 Litre of Prolan covers approx 8-10 sq metres.
Applications can be recoated directly over top of the existing coating. The coating should be inspected after 12 months to make sure that any areas that have been missed can then be touched up.
In cooler temperatures the product will thicken and may need to be warmed by placing in a bucket of hot water.
N.B Cold water blasting will not remove Prolan Coating.
Prolan cleaner available to remove existing coatings.
Environmentally friendly
Biodegradable/Natural
Clean to Use
Versatile
Prevents galling on stainless steel
Non-carcinogenic
Non-Leaching
Non- Evaporative
Non-Conductive to 70Kv
Resists acids and salts
Hermetically seals off surfaces
Stays on
Will not break down rubbers or wiring
Safe to use in food areas - International NSF 1 - Eurofins France potable drinking water approvals
NZ MPI C15 Approval - Dairy and Non-dairy
Long lasting protection saving time on multiple re-application.
Prevents moisture & oxygen from contacting metal surfaces.
Will last longer in joints or threads and allow easy maintenance.
Doesn’t leave behind fingerprint marks like other products.
Won’t break down rubber and wiring.
Seals off the surfaces from air and moisture and prevents corrosion.
Safe to use, environmentally friendly and biodegradable.
Added electrolysis barrier between dissimilar metals.
Smear and wipe onto surface as required.
Note: Cold conditions can make the grease tube a little hard to squeeze. This is easily fixed by placing in the pocket for a few minutes before use or removing the nozzle and using like a toothpaste tube.
For the larger tubs a quick zap in the microwave for 2 – 3 minutes. If completely melted it can be applied using a paintbrush.
Modal title
...
Close
From Nature to Protect Nature